EVE-NG General FAQs
Ready to Download Linux Images
Due to very high demand of this section and problems with how to create Linux images under EVE, we are offering ready to go and prepared Linux image pack. You can choose any of Linux image from the pack below and simply upload into EVE. Download your ...
EVE-NG OOB ACCESS ( Use of Cloud1 network)
EVE-NG OOB ACCESS ( Use of Cloud1 network) Introduction Preface This document outlines how to access and use the devices over Cloud1 for out-of-band management in EVE-NG on Cloud My Lab infrastructure. Audience This document is intended for use by ...
How to access Devices Services within EVE Instance using the Jump Host/VD (Virtual Desktop)
Purpose of this Document This document Focuses on helping CML customers understand, how can they easily use a management network to provide devices within the EVE-NG server. Common Use cases Access device GUI from the Jump Box Example: Customer ...
Setup Palo Alto Management IP using Cli
This document describes how to configure the Management Interface IP on a Palo Alto Networks device. Steps CLI: Note: Hook up a Palo Alto Networks console cable to a Palo Alto Networks device first. Login to the device with admin/admin, unless you ...
EVE-NG Community VS EVE-NG Pro
FEATURE EVE-NG COMMUNITY EVE-NG PRO Wireshark Capture Local Wireshark Capture Integrated Wireshark Capture Lab Timer Not supported Timer for lab training Running Labs Not supported User can run multiple labs together Node limit per lab 63 1024 ...
Troubleshooting Boot Loader Prompt for Nexus 9K
If the system boots and falls into “loader>” prompt. Do the following steps. Step 1: Issue the command dir to check the directory and enter the command: boot nxos.9.2.1.bin Step 2: Once the switch is boot up, set password for Nexus 9K, Step 3: ...
How to Configure pfSense on EVE-NG
Step 1: Open the EVE-NG in the browser then ‘add an object’ and select the Node. Step 2: Add pfSense Node and Start the node. Step 3: Start pfSense node. Step 4: Set VLAN for LAN interface. Interfaces will be assigned as follow: WAN - vtnet1 LAN - ...
How to Import Images using WinSCP
In WinSCP the column on the left represents a file on the local machine and the column on the right represent files and folder on the remote machine. Step 1: Log in with the given credentials. Step 2: Go to the path opt->unetlab->addons->qemu on the ...
ASAv Licensing
This is quite commonly asked that if you need licensing for ASAv to run all the features in the lab. The Answer is NO, you can successfully run all the supported features on the firewall with two Caveats. 1. The maximum throughput you will get on the ...
EVE-NG Device Resources
Device CPU COUNT Ram in MB a10 1 2048 acs 2 4096 asa 1 2048 asav 1 2048 barracuda 2 2048 bigip 2 8192 brocadevadx 2 2048 c1710 1 96 c3725 1 256 c7200 1 512 cda 2 2048 cips 1 2048 clearpass 2 4096 coeus 1 4096 cpsg 4 6144 csr1000v 1 3072 csr1000vng 1 ...
EVE-NG Node Credentials List
Instance Name Username Password Console type Cisco ASA 802 no passwd, hit enter telnet Cisco ASA 8.4.2, 9.1.5 no passwd, hit enter telnet Cisco ASAv no passwd, hit enter telnet Cisco IPS cisco ciscoips123 telnet Cisco WSA admin ironport ...
Devices are not booting up. What should I do?
Sometimes the device image can get corrupted. In that case, simply wipe your node/device and refresh your topology. This brings back the device to its base configuration.
Can you add physical devices on my lab instance once I subscribe?
Yes, we can add physical devices to your lab instance at a cost. Example- 3500 series access points at $10 a month, CISCO 3750x switches at $100/Month, ASA 5512 at $150 a month, etc
Do you provide licensing for EVE-NG?
The Community version does not have any licensing. However, if you need licensing check out the EVE-NG PRO.
Do you provide help to build a topology according to my lab needs?
Yes, we can build your topology inside your EVE-NG lab instance (Pod) given that you sign the Liability Waiver.