Cloudmylab KnowledgeBase
            Knowledge Base Cloudmylab VIRL HOSTED Services LAB ACCESS GUIDE

            VIRL BYOL Lab Access Guide

            Getting Access to the Pod
            1. There are two methods you can get access to the access detail as mentioned below.
              • Check for the Url and Port Number in the email from [email protected]

              • You can alternatively log in to your account and under my account Rack access, you will see the details

            2. Login with the credentials provided

            3. Once you login you will see a customized Desktop from where you can access all the devices.

             

            How to restart the VIRL Server

            Once you get the access to the Guest Desktop Environment.

            1. Open Chrome, you will see the following bookmark
              • Restart VIRL
              • VIRL Login

            2. Click on "Restart VIRL" bookmark

            3. After that, you will get the following screen with 180 seconds countdown timer. Please be patient and wait for the timer to expire. (Do not reload the page)

            4. After the timer expires, following screen will appear. Click on "Click here" button to proceed.

            5. You will see the following window.

              • VIRL server address: Provided in access mail

              • Username: Provided in access mail

              • Password: Provided in access mail

             

            How to update Salt Configuration

            1. Once you purchase VIRL, you will get Salt Configuration details
            2. Now go to VIRL Server => Salt Configuration and Status => Reset Keys and ID

            3. Enter your Salt Configuration details as follows

            4. Click on Reset

             

            How to start simulation using VMMaestro

            Introduction to VMMaestro       
               

             

            Create new topology

            https://www.youtube.com/watch?v=XIIMc4OOXZk&list=PLo_CEo6CIpZOFDmZFfdgUzGNY4efuPJbJ

            Create simple network

            https://www.youtube.com/watch?v=dQtbB99ZSMY&list=PLo_CEo6CIpZOFDmZFfdgUzGNY4efuPJbJ&index=3

             

            Building configurations

            https://www.youtube.com/watch?v=jYNmK60hqGs&list=PLo_CEo6CIpZOFDmZFfdgUzGNY4efuPJbJ&index=4

            Working with simulations

            https://www.youtube.com/watch?v=4vE4fiy1dBE&index=5&list=PLo_CEo6CIpZOFDmZFfdgUzGNY4efuPJbJ

             

            Working with node configurations

            https://www.youtube.com/watch?v=RovgBX0NBeg&list=PLo_CEo6CIpZOFDmZFfdgUzGNY4efuPJbJ&index=6

             

            How to start simulation using VIRL web interface

            Detailed Walkthrough

            https://www.youtube.com/watch?v=H3LYE5ieNZo

             

            Browser-based topology editor

            https://www.youtube.com/watch?v=YFSdFCwCNa0


            Updated: 14 May 2018 07:50 AM
            Helpful?  
            Help us to make this article better
            0 0