Features support- Cisco Nodes on EVE-NG

Features support- Cisco Nodes on EVE-NG

List of supported features for IOSv: (Layer 3 switch equivalent feature set)

802.1Q, AAA, ACL, BGP, DHCP, DNS, EEM, EIGRP, EoMPLS, Flex Netflow + TNF, GRE, ICMP, IGMP, IP SLA, IPSec, IPv6, ISIS, L2TPv3, MPLS, MPLS L2VPN, MPLS L3VPN, MPLS TE, Multicast, NAT, NTP, OSPF, PfR, PIM, PPPoE, RADIUS, RIP, SNMP, SSH, SYSLOG, TACACS, TFTP, VRF-LITE

Features likely to work for IOSv:

HSRP, VRRP, GLBP, EZVPN, QoS, LISP, ZBFW, Performance Monitor



List of supported features for IOSvL2: (Layer 2 switch equivalent feature set)

Layer-2 forwarding , Switchport, 802.1q trunk, 802.1q  VLANs , Spanning Tree, Port-Channel (Pagp and Lacp), 802.1x passthrough, Port-ACLs, Dynamic Arp Inspection, DHCP Snooping, IP device tracking, Switched Virtual Interfaces, Layer-3 forwarding over SVIs, Routing protocol support, VTP v1-3, PVST, QoS, Inter-VLAN routing, VLAN Access Maps (VACLs / access control lists for VLANs), ACL functionality for both layer2 and layer3 protocol packets, Dynamic Trunking Protocol support, Switchport protected mode


List of supported features for CSR1000v: ( ISR router equivalent  feature set)

802.1Q, AAA, ACL, BGP, DHCP, DNS, EEM, EIGRP, EoMPLS, Flex Netflow + TNF, GRE, ICMP, IGMP, IP SLA, IPSec, IPv6, ISIS, L2TPv3, MPLS, MPLS L2VPN, MPLS L3VPN, MPLS TE, Multicast, NAT, NTP, OSPF, PfR, PIM, PPPoE, RADIUS, RIP, SNMP, SSH, SYSLOG, TACACS, TFTP, VRF-LITE

Features likely to work for CSR1000v:
HSRP, VRRP, GLBP, EZVPN, QoS, LISP, ZBFW, Performance Monitor


List of supported features for Nexus9000v:


Programmability: NXAPI, Puppet Integration (Native), Puppet Integration (Guest Shell), Chef Integration (Native) and Chef Integration (Guest Shell).

L3 Features: CDP, LLDP, BGP v4, BGP v6, OSPFv2, OSPFv3, EIGRP, RIP.

L2 Features: L2 Switching Unicast, L2 Switching Broadcast, L2 Switching Multicast, ARP Suppression, MAC learning, Static/Router MAC, Switchport, 802.1q VLAN Trunk/Access, STP, L3 SVI, Subinterfaces, VXLAN and VXLAN EVPN, VXLAN EVPN Multi-Site and vPC, Port Channel.

Read more for Nexus9000v: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/9-x/nx-osv/configuration/guide/b_Cisco_Nexus_9000v_9x/b_Cisco_Nexus_9000v_9x_chapter_010.html#concept_CFB4F9FC4EF04A86835CF9C64C4EB8A4


    • Related Articles

    • How to make the Cisco Access Points work with Hosted EVE-NG on Cloudmylab platform

          Purpose The purpose of this document is to help cloudmylab Customers and partners to set up a base Cisco Wireless Lab   Pre-Requisites 1.       WLC version 8.5.X 2.       AP version 15.3.3 JF 1 or higher 3.       AP 3502i   Refer to the WLC ...

    • EVE-NG Community VS EVE-NG Pro

      FEATURE EVE-NG COMMUNITY EVE-NG PRO Wireshark Capture Local Wireshark Capture Integrated Wireshark Capture Lab Timer Not supported Timer for lab training Running Labs Not supported User can run multiple labs together Node limit per lab 63 1024 ...

    • Do you provide IOU/IOL for EVE-NG Hosted Service?

      No. However, if you have the image, you can upload it yourself after you sign Liability Waiver form

    • EVE-NG Community Lab Access Guide

      Getting Access to the Pod There are two methods you can get access to the access detail as mentioned below. Check for the Url and Port Number in the email from support@cloudmylab.com Login with the credentials provided Once you login you will see a ...

    • EVE-NG Professional Trial Lab Access Guide

      Getting Access to the Pod There are two methods you can get access to the access detail as mentioned below. Check for the Url and Port Number in the email from support@cloudmylab.com You can alternatively log in to your account and under my account ...