Popular Articles
Troubleshooting Boot Loader Prompt for Nexus 9K
If the system boots and falls into “loader>” prompt. Do the following steps. Step 1: Issue the command dir to check the directory and enter the command: boot nxos.9.2.1.bin Step 2: Once the switch is boot up, set password for Nexus 9K, Step 3: ...
EVE-NG Node Credentials List
Instance Name Username Password Console type Cisco ASA 802 no passwd, hit enter telnet Cisco ASA 8.4.2, 9.1.5 no passwd, hit enter telnet Cisco ASAv no passwd, hit enter telnet Cisco IPS cisco ciscoips123 telnet Cisco WSA admin ironport ...
Import Labs in EVE-NG
Once you have the Topology on the remote desktop, open EVE-NG session and follow the below steps: Step 1: Click on the Import button. Step 2: Choose the zip file which contains the EVE-NG lab. NOTE: File must be in .zip format, do not unzip the ...
Setup Palo Alto Management IP using Cli
This document describes how to configure the Management Interface IP on a Palo Alto Networks device. Steps CLI: Note: Hook up a Palo Alto Networks console cable to a Palo Alto Networks device first. Login to the device with admin/admin, unless you ...
VXLAN LAB on EVE-NG Platform
Scenario: configure VxLAN both Flood & Learn and EVPN mode. Premise: · You have 1 Spines and 3 Leafs. Leaf-2 and Leaf-3 are setup as vPC pairs. The host port on Leaf-1 is in VLAN 10 and on Leaf-2 in VLAN 10 & 20 vPC pair has a L2 switch ...